|
NOTE: Due
to constantly fluctuating prices throughout the steel industry, it is
impossible for Wear-Con to put any of our premium grade wear plate in with
the many other products we sell online. But all it takes is a phone call to
get current pricing. And as a full service wear-solutions company, we can
custom cut, roll or form any of our plate stock to fit your specific
application.
WC400 Wear Plate:
WC400 Wear Plate is a premium grade wear
plate. This high Brinell, through hardness wear plate provides excellent
abrasion resistance as well as impact resistance. WC400 can be used as a
basic component or as a liner in all types of material handling equipment.
Easily weldable with a E7018 rod. Drilling can be done with any high-speed
drill. Formability can be done in cold forming conditions. Available in
thicknesses of 3/16" to 4".
Detailed Specs and
Suggested Uses
WC500 Wear Plate:
Wear-Con 500
Wear Plate is specially designed to reach nominal hardness of 500 BHN. Built
in strength and through hardness gives Wear-Con 500 exceptional resistance
to both impact and sliding abrasion. Hardness of material increases in the
center. Because of the fine grain structure, this is an excellent material
to form. Easily weldable with a E7018 rod. Available in thickness of 1/8” to
4”.
Detailed Specs and
Suggested Uses
WC600P Induction Hardened Wear Pipe:
Wear-Con WC600P
provides outstanding wear resistance for pipelines used in transporting
solids or slurries. WC600P features an inner wall with a hardness of 600
Brinell and outer wall hardness of 250-300 Brinell. WC600P will last 6 to 8
times longer than mild steel pipe in high abrasion/erosion applications.
WC600P is easy to install, fabricate or repair in the field. WC600P can also
be ultrasonically monitored to allow for well-timed rotations or
replacement.
Detailed Specs and
Suggested Uses
WC700 Chrome Carbide Wear Plate:
Wear-Con 700 Chrome
Carbide Wear Plate is a unique chromium carbide overlay on a mild steel base
plate. It is designed for areas with severe impact and abrasion. Wear-Con
700 can be formed, rolled and cut to your specific needs.
Detailed Specs and
Suggested Uses
WC700 Plus Chrome Carbide Wear Plate:
Wear-Con 700 Plus Chrome
Carbide Wear Plate is a unique chromium carbide overlay on a mild steel base
plate. It is designed for areas with severe impact and abrasion. Wear-Con
700 can be formed, rolled and cut to your specific needs. The 'Plus'
denotes the extra chrome carbide content, which results in longer wear.
Detailed Specs and
Suggested Uses
WC700XT Chrome Carbide Wear Plate:
Wear-Con 700 XT Chrome
Carbide Wear Plate is a complex Chrome Carbide Overlay on a stainless steel
base plate. It is designed for areas of severe impact and abrasion, but
under high service temperatures of extreme PH conditions. Wear-Con 700 XT
can be formed, rolled, and cut to your specific needs.
Detailed Specs and
Suggested Uses
WC700 Chrome Carbide Wear Pipe:
Wear-Con WC700P
provides excellent resistance to severe abrasion, erosion and impact. WC700P
will last up to 10 times longer than mild steel pipe and is easy to install,
offers lower life cycle costs and can be custom fabricated to aid pipe
design or replacement.
Detailed Specs and
Suggested Uses
WC700P Plus Chrome Carbide Wear Pipe:
Wear-Con WC700P Plus
Pipe
provides excellent resistance to severe abrasion, erosion and impact. WC700P
Plus Pipe
will last up to 12 times longer than mild steel pipe and is easy to install,
offers lower life cycle costs and can be custom fabricated to aid pipe
design or replacement. The 'Plus' denotes the extra chrome carbide
content, which results in longer wear.
Detailed Specs and
Suggested Uses
WC750 Chrome Alloy Pins:
Wear-Con 750 Chrome
Alloy Pins are a Air Hardened Style Overlay which will work harden to a 65
RC. They are designed to withstand the most severe wear in metal to metal
applications, and will typically outlast OEM and manganese pins used in
dragline shovel bucket applications. They are also rebuildable, which can
provide a significant cost savings over time.
Detailed Specs and
Suggested Uses
SHC800 Solid High Chrome Wear Panels:
Wear-Con’s SHC800 Solid High-Chrome Wear Panels are cast from High Chrome
white iron with a hardness of 55-58 HRC. These wear panels are unsurpassed
in abrasion resistance and are easily installed. The chromium carbides
provide maximum abrasion resistance along with the ability to withstand
higher temperatures. Wear-Con’s SHC800 Wear Panels will out last alloy plate
and will perform to abrasion standards similar to ceramics.
Detailed Specs and
Suggested Uses
WC900 Tungsten Carbide:
Wear-Con 900 Tungsten
Carbide Wear Plate is a unique Tungsten carbide overlay on a mild steel base
plate. It is designed for areas with severe impact and abrasion. Wear-Con
900 can be formed, rolled and cut to your specific needs.
Detailed Specs and
Suggested Uses
WC910 Tungsten Carbide:
WC910 Tungsten Carbide
tiles provide a more economical way of extending the life of parts and
castings as compared to manufacturing them completely out of Tungsten
Carbide. WC910 is applied by induction brazing with strict quality control,
insuring permanent placement of the Tungsten Carbide and consistency in
every application. WC910 Tungsten Carbide can provide up to 50 times the
life of mild steel. Special carbide grades can be applied where higher
impact, sliding, or corrosion resistance is required.
Detailed Specs and
Suggested Uses
Wear-Con AR Plate:
Wear-Con AR Plate is a
high abrasion resistant carbon wear plate. It has a 235-250 Brinell hardness
which provides wear protection in many applications with relatively low
cost. Wear-Con AR Plate will outlast hot rolled carbon steel by a wide
margin. Wear-Con AR Plate can easily be drilled, machined, punched, and
welded. Moderate amounts of forming are also applicable. Available in
thickness of 3/16” to 1”.
Detailed Specs and
Suggested Uses
FeatherClad:
Ultra-thin Hardfaced
Wear Plate.
- Hardsurfacing: refined
microstructure with high volume of chromium carbides. Extreme wear
resistance.
- Hardmess: 68 HRC.
Harder than quartz.
- Thickness less than
3/16". Considerable weight reduction relative to conventional hardfaced
plates.
- Easy to shape and to
fix. Tubes down to 4 inches in diameter.
- Economical size sheet:
3'-1" x 6'-4" (125 lbs) Part # WC-768FC
Great for transport and
processing of abrasive materials: pipework, elbows, fans, classifiers,
screws, hoppers, chutes, buckets, deflector blades, and more.
More Info >>
|